Repairing holes and restoring and protecting your fibreglass roof couldn’t be easier with our GRP Roof Restoration and Hole Repair Kit.
Just clean, stick on the repair patches over any holes then paint on the coating, it’s that simple.
What You Need to Know:
Colour: Pale grey
Size: 6kg or 15kg tin
Coverage: 1m2 per kg of coating and either 1 or 2 x SpeedPatch 150mm x 225mm (depending on the kit size you purchase).
Application: Stick on speedpatch and remove protective film then paint or roller on restoration coating
Touch dry time: 3 to 4 hours
Whats in the kits?
Kits come in 6kg and 15kg sizes.
A 6kg kit contains: 1 x 6kg Tin of GRP Restoration Coat, 1 x SpeedPatch 150mm x 225mm each, 1 x 9″ Roller head and 2 x 9″ Roller Sleeve, 1 x 2″ brush.
A 15kg tin kit contains: 1 x 15kg Tin of GRP Restoration Coat, 2 x SpeedPatch 150mm x 225mm each, 1 x 9″ Roller head and 2 x 9″ Roller Sleeve, 1 x 2″ brush.
If you need extra Speedpatches you can buy them individually or in multi-packs
How Do I apply It?
Simply clean your fibreglass roof, make sure there are no protruding glass fibres. Cut the SpeedPatch to the required size whilst still in it’s packet, remove that piece and apply to the hole. Allow the patch to cure fully in daylight until hard. Remove the shiny cover film on the top of the Speedpatch then coat the whole roof including over the repair with a generous layer of our GRP Roof Restoration Coat.
Once cut, the SpeedPatches will start to cure even if left in their packet so make sure you have everything ready to use up each SpeedPatch quickly as it is cut.
For a nice clean finish we recommend you tape around the edges, apply the coating then remove the tape as soon as the coating starts to get tacky.
Why Choose GRP Restoration Coating?
- Minimal preparation
- Just one coat, no primer needed
- Easy to apply
- 10 – 15 years life expectancy
- Tough finish
- Tolerant of high humidity, unlike GRP resin
- Tolerant of a range of temperatures during application
- Easy to re-coat in the future
Need A Different Kit?
If you have any cracks you might want to consider using the GRP Roof Restoration Kit for Cracks.
If you need to reinforce the area, you might want to consider using the GRP Roof Restoration and Reinforcement Kit.
Need to make repairs first? No problem, just have a look at our GRP Repair kits which come with all the tools and additional products you’ll need to make repairs on their own or before coating.
6kg or 15kg tin
1kg per m2
Touch dry time of top coat:
3 to 4 hours
Get the surface clean and dry. Stick on the Speedpatch (it starts to cure as soon as you take it out of the packet so use immediately). Once hardened peel off the shiny protective film then paint on Restoration Coat using a brush or roller. If you want a clean edge you can use masking tape on the edges and remove as soon as the coating starts to become tacky.
This product has definitely done the job, I have had several roofers trying to fix leak with no success, after some heavy rain yesterday my roof is now watertight. It a brilliant product!
Mr J Coppin
The product is superb, by far the best I have ever used and I have used many different coatings over the years.