Secure Payments
Fast Delivery
First Class Service
+44 (0)1453 872850
Professional roof repairs
made simple for DIY homeowners
Login/Register
Product has been added to your basket.
Surface Level Pro®- - the ideal roof leveling compound
Surface Level Pro®- - the ideal roof leveling compound - Image 2
Surface Level Pro®- - the ideal roof leveling compound - Image 3
Surface Level Pro®- - the ideal roof leveling compound - Image 4
ponding water

Surface Level Pro®- – the ideal roof leveling compound

Price range: £139.03 through £627.21 (inc. VAT)

Previously known as Greenslope.

Don’t let ponding water ruin your roof. Everything you need to flatten out uneven areas on your roof.

roof repair kit tick Everything you need in one kit
roof repair kit tick Just mix contents of the bucket, fill the area and add a top coat.
roof repair kit tick Stops ponding water
roof repair kit tick Delivery costs now included
SKU: N/A Categories: ,

Description

What is Surface Level Pro®?

Surface Level Pro® fills the dips in your roof to stop ponding water. It works by filling in the uneven area with a mixture of recycled rubber crumb, polystyrene beads and a binding adhesive that forms a strong, yet light, surface. It is lightweight, quick and easy to use and as environmentally friendly as possible. It will fill up the dips where the water is pooling and make your flat roof flat again. Once a top coat has been applied it is completely water tight and you can say goodbye standing water problems on your flat roof.

Do I need a top coat?

That depends on if you are already using a membrane to seal it. If you are planning to put a material over it, for example felt, epdm or pvc, then you don’t need to add a top coat.

If you are not planning on adding another material to completely seal the Surface Level Pro®, then you will need to add a thixotropic top coat to  seal the surface.

You need to topcoat the Surface Level Pro® once it’s been applied and before it rains.

A thixotropic top coat seals the Surface Level Pro® so that water can’t get in. It needs to be thick (preferably fibre reinforced) as a thin coat will drip through into the filler.

It’s important it’s applied thickly enough that it doesn’t soak through into the Surface Level Pro® and whilst you might be tempted to use a short pile roller it is not easy to get the coating to lay smooth and the fibres could clump up.

How many kits will I need?

One kit will cover the metre square area stated below (Sq m) x the depth shown below (mm). Multiple discount is available on orders of more than one kit. For orders of over 3 kits please contact us on 01453 872850.

Coverage Guide
Thickness Coverage
5 mm 3.6 Sq m
10 mm 1.7 Sq m
20 mm 0.9 Sq m
30 mm 0.6 Sq m
50 mm 0.4 Sq m

This unique and innovative kit contains everything you need to fix ponding water on your flat roof. Sold in over 60 Stores across the US and winning many prizes, including 2018 Roofing Magazine’s Product of the Year, this tried and trusted method for fixing your flat roof is now available for DIYers and contractors alike due to its simple application method.

Made with recycled rubber crumb and using recycled rubble sacks and recyclable plastic resin and catalyst containers, you can rest assured when fixing your roof you are being environmentally sympathetic. An easy but strong, durable and reliable fix, that doesn’t cost the same as a new roof!

Can you walk on Surface Level Pro?

Yes, you can walk on Surface Level Pro. As always, ensure the rubber crumb is tampered down hard and you have layered with a top coat, then you’ll be good to go!

Can I apply your GRP Coating over Surface Level Pro?

Before applying the GRP Coating, you must first use a top coat to seal in the Surface Level Pro. After that, you can apply the GRP Coating. You cannot use the GRP Coating as a substitute for the top coat because it is not thick enough to seal the Surface Level Pro.
Size:
One size bucket.
Coverage:
1bucket will cover a hole approximately 1M wide by 1M long and 18mm deep. See coverage guide opposite for more variations in depth and width coverage.
Application:
Get the surface clean and dry. Mix accelerator and binder then apply mixture onto affected area and a bit beyond. Mix up all the bucket ingredients with remaining binder in mixing bag. Pack the filling mixture into the affected area and pack down. Once dried apply a layer of your top coat if not sealing with another material.

APPLICATION INSTRUCTIONS

Prepare:

Identify the ponding area and mark an outline on the roof surface with paint. Thoroughly clean the area and make any needed repairs to ensure a good bond. Make sure the area is dry. Note: Pressure washing or cleaning with an all-purpose cleaner can help with extremely dirty areas.

Prime:

Note: mix the material after priming. Pour the small accelerator provided into the binder and mix/shake thoroughly. Apply this mixture as a primer onto the ponding area earlier outlined with the paint brush provided BUT make sure you paint the primer on an extra 50mm round the edge of where the Surface Level Pro® will end. You don’t have to wait for the primer to dry before packing in the filler.

Mix:

Pour all the rubber granules, polystyrene beads and the remaining binder into the mixing bag, seal with the cable tie and mix everything at once, usually only takes 4-5 minutes to mix. We recommend rolling the bag on a smooth surface to get the best mixture. If you only need a small amount, mix in the bucket.

Spread & Compress:

Open the bag and pour the contents over the desired area and spread the mixture using a trowel or straight-edge. Wet the trowel in solvent to stop the components sticking ( you may need to keep dipping it but if you use too much it will affect the binder setting properly). We recommend using a spirit level to check that you have spread it to the gradient desired. IMPORTANT; It is essential to compress the material thoroughly using the trowel, especially around perimeter to minimize water infiltration and make a smooth surface for the top coat. Wait until the Surface Level Pro® is dry before applying a top coat.

Top Coat:

Apply your top coat with a trowel. It’s important it’s applied thickly enough that it doesn’t soak through into the Surface Level Pro® and whilst you might be tempted to use a short pile roller it is not easy to get the coating to lay smooth and the fibres could clump up.

Note: If it looks like it might rain before you can apply the top coat, make sure you cover it well so that no water can get in as it won’t be able to drain away.