Instantly seal holes and gaps in your asbestos, cement and metal gutters with the highly durable cut-to-size SpeedPatch Kit, and stop leaks today.
Fully waterproof most-sized holes with a tough and long lasting barrier
Primer and SpeedPatches cure with sunlight, so no catalyst or mixing required
Quick and easy to apply, especially with the comprehensive photo guide
UV Curing Resin provides a durable primer to give your repair long term adhesion
Cut and shape into position, highly flexible before cured so ideal for holes
Save time and money by avoiding costly repairs
Sizing Up Your Gutter Repair Job
Small Kit Suitable for 3 holes of no more than 8cm x 4cms each, or for covering the same total surface area across smaller holes. Includes 3 x SpeedPatch No.1 + 250ml Primer
Medium Kit – Suitable for 3 holes of no more than 8cm x 4cms each and 1 hole of 20cms x 13cms, or for covering the same total surface area across smaller holes. Includes 3 x SpeedPatch No.1 + 1 x SpeedPatch No. 2 + 500ml Primer
Large Kit – Suitable for 3 holes of no more than 8cm x 4cms each and 3 holes of 20cms x 13cms, or for covering the same total surface area across smaller holes. Includes 3 x SpeedPatch No.1 + 3 x SpeedPatch No. 2 + 1L Primer
Everything you need for complete roof hole repair:
Tough and flexible SpeedPatch, fully weatherproof sealant for holes in your cement, metal and asbestos gutters
UV Curing Resin acts as a primer to ensure proper adhesion and long term waterproofing
ISO A-Clean, specialist roof cleaner to prepare the surface
Comprehensive step by step guide for application
Brush for easy application of the primer
Disposable gloves to keep your hands dry and clean
Only logged in customers who have purchased this product may leave a review.
How To Fix A Leaking Roof It can be costly to replace a roof and yet the problem might just be holes in your roof or gutter. How can little golf-ball sized holes end up costing you so much?
That’s why we’ve made it easier than ever to fix your own felt, PVC, EPDM, GRP, metal or timber roof, and still get an effective repair that’ll remain watertight in the long run. How? By using expert solutions that outlast other instant repairs that you’ll find in your local hardware store.
First off, a few notes on safety:
Ensure your roof or gutter is structurally stable and that you’re safe at all times
How To Clean Your Roof Start as you mean to go on. Do a thorough clean and your roof repair can be 100% weatherproof in the long run. If you can pressure wash your roof then do. Ensure you clean well beyond the hole and affected area. You should be left with an area free of dirt and grime.
Every kit is equipped with the powerful biocide, A Clean. This was developed by the market leaders in roof coatings in the competitive markets of Scandinavia and northern Europe, and it’s now available for your roof repair. Mix 1 part A Clean to 50 parts water. Now moss and spores won’t develop under the repairs and you can stop leaks for longer.
How To Prime your felt, PVC, timber or metal Roof Most porous surfaces need priming to allow proper adhesion and long term weatherproofing, and your roof is no exception. This kit comes with a UV curing resin that will dry when exposed to sunlight, making it clean and easy to use. Wait for the surface to dry after your thorough clean, and then paint the primer onto the damaged area. Completely cover the hole and the surrounding area with a generous amount of primer. Wait for this to dry before applying the SpeedPatch. Drying/curing time will depend on the day’s brightness, and you can use a UV light to speed up the cure.
How To Waterproof Your Roof Surface well prepared and primer all dry, and you’re ready for the main event. SpeedPatches are UV cured, so exposure to the daylight will begin to turn them rigid. With this in mind, it’s best to handle the patch carefully, keeping it as much in the shade as possible (even if the only shade that day is from you). Cut open the foil packet and cut the patch to size. Keep in mind that it’s best to cover well beyond the hole for added durability. One side of the SpeedPatch is covered with a sun-blocking tape. Keep this on until after application. This is the side that faces toward the sky. On the other side there is a clear film which you can now peel off.
Apply the speedpatch over the hole so that the sun blocking tape faces up. Apply pressure where it’s safe to do so and ensure that all areas are properly adhered to your roof. Peel off the black tape and continue applying pressure, particularly around the edges of the patch.
Bigger holes and severely chipped sheets can also be suitable for repair, although you’ve got to make sure that the speedpatch can get enough space around the damaged area.
Felt, Metal, PVC, EPDM and Timber Roof Repair Tips And Tricks You’re so close to having a beautifully sealed roof. We believe these solutions are the best in the business. We wouldn’t be selling them to you otherwise.
So get in touch and tell us more about your project, preferably with some pictures, and we can get the ball rolling on your repair.
Get the right roof repair kit for a watertight finish Forget the expense of contractors. These are DIY kits that can save you time and money and make your repair quick, easy and effective in the long run.
So, you know you’ve got a leaking roof, but what else do you know about your roof?
Can you see any holes? If so, how big are they? Can you see any cracks? Are they just hairline ones or bigger? Got both holes and cracks in your roof? Have you got any generally porous areas where liquid is seeping through? Is rain coming through the boltheads? Is it an unknown leak?
‘I’ve got holes in my roof’ Not to worry. You can pop a fibreglass style repair patch over the hole to completely seal it. These are called SpeedPatches and they’re perfect for covering holes in asbestos, fibreglass, felt, PVC, EPDM, timber and metal roofs and remaining waterproof in the long run. Having been used for years to seal holes in roofs of all kinds, they’re backed up by a reliable service history. Plus they’re super easy to use.
The SpeedPatches can be cut to size and used on holes from minuscule sizes up to 22cm x 12cms, although the bigger the size the less the SpeedPatch has to grip onto either side of the hole, which could affect longevity. There are three different sizes of kit so you can find the perfect match for your project.
As well as SpeedPatches, you’ll need some A-Clean and UV Curing resin to properly prepare the area. You can get everything you need, as well as gloves, brushes and a guide with the roof hole repair kit.
‘I’ve Got Cracks In My Roof’ Easy. Pop some tough rubber butyl tape over the crack after a quick prime. Unlike bitumen or acrylic based solutions which crack in the cold and expand in the heat, butyl rubber is built to withstand temperature changes and stop your leak in the long run. This kit uses the foil backed butyl tape which means the rubber won’t break down after relentless sun exposure.
Cracks in worn asbestos cement or fibreglass are fairly common, and this crack repair kit was designed for quick and easy use. The tough butyl is 100% weatherproof and easily fits over hairline cracks so you don’t have to be an expert to repair your roof. These are top quality products that have been chosen after years of real world testing. The result is that they make it easier than ever to repair your asbestos roof.
For the foil backed butyl to create a watertight seal, your roof needs to be cleaned and primed first. This kit gives you everything you need, including the roof biocide A-Clean and a specialist primer. Check out the Crack Repair Kit and get your leak sealed before the next rainfall.
‘I’ve Got Both Holes And Cracks In My Roof’ You’re not alone. With the amount of asbestos and other old roofs out there in the UK, chances are some of your neighbours’ roofs are also shot through with holes and cracks. Not to worry. That’s exactly why we’re here. For both holes and cracks, it’s best pick up both the Roof Hole Repair Kit and the Crack Repair Kit. Equipped with both you can seal both the holes and cracks in your roof and get a watertight roof in no time.
‘I’ve Got Cracks And A Generally Porous Area Where Water Is Getting Through My Roof’ Cracks can cause huge amounts of water to leak into your property and cause havoc to machinery, furnishings and interior walls. Coupled with generally porous roof sheets, your roof could be as useful as sieve during the next storm. It’s easy for you to wake up one morning to find irrevocable damage to your building. That’s why we’ve invented a kit to stop those leaks today and with only one repair method necessary.
This kit gives you the mighty fleecebacked butyl tape. Combine this with our most popular instant Alltimes Liquid Rubber, and you’ve got a highly durable and watertight seal that can stop your leaks today. The fleece fixed to the weatherproof butyl tape will embed itself to the liquid rubber, creating a reinforced repair that can outlast many standard DIY roof repair products.
Get everything you need, including gloves, brushes and a step by step photo guide that makes application easy. Built by experts, this kit is designed to seal your roof asap and save your building from further water damage. Check out the crack and roof sheet repair kits to save your property.
‘I’ve Got Rain Coming Through The Bolt Heads In My Metal or Asbestos or GRP Roof’ Bolts in asbestos roofs can often be the cause of roof leaks, and many people are led to believe that replacement or overclad are the only options. The bolt holes can expand after years of temperature changes and let your roof down. That’s why we’ve dedicated this asbestos roof repair to sealing your bolt holes.
Unlike vulnerable bitumen or acrylic based repairs, this 6mm thick butyl tape has the durability to waterproof your roof in the long run. Coupled with the UV resistant and reinforced StopGap, this butyl provides a watertight seal around the whole bolt head. You can get everything you need to seal your boltheads and weatherproof your roof with the Asbestos Roof Bolts Repair Kit.
‘I’ve Got An Unknown Leak On My Roof’ Moss, dirt and grime can conceal exactly why your roof is leaking. Under all that dirt there could be holes, cracks and generally damaged sheets, all contributing to your problem leak.
The first thing you’ll need to do is to give your roof a good clean. Use the specialist Biocide A-Clean to get a completely clean surface that’s ready for repair.
Next up you’ll need to consider whether or not it’s best to patch repair parts of go for a complete refurbishment. Patch repair will be along the lines above.
Any questions just give us a call, we’re happy to help!
1) Do I need any extra tools or experience to apply it? No. This is a complete DIY kit. You’ll get everything you need to stop the leak. The only extras you’ll need is a bucket to mix the A-Clean and water together, and a soft brush for the cleaning. This can be a standard dustpan style brush, so long as the bristles are soft.
2) Why should I get a kit? All of the products in the kit have been carefully selected. They’re generally more durable, longer lasting and easier to apply than what you’ll find at the local hardware store. Roofing contractors have been using these materials for years, and they’re now available to you. It’s also more cost effective to order a kit than to buy the items seperately.
3) How long will the repair last? You should expecct 5-10 years, but it could be much longer, or shorter if it gets damaged. There’s no clear cut answer for this as it’ll depend on the roof conditions and future weathering. What we can say is that the butyl tapes can easily outlast many other solutions.
4) Is asbestos safe to repair? Yes, so long as you follow HSE guidelines. Keep yourself safe at all times.
5) Why should I use butyl tape? Butyl is a tough rubber that can handle temperate change and building movement. This sets it apart from other roofing tapes and solutions, particularly bitumen which has a reputation for cracking in the cold. The butyl is completely waterproof and forms a well adhered seal when combined with a coating or primer.
6) Why is the butyl tape foil or fleece backed? The foil provides a UV resistant barrier to protect the rubber tape from sun exposure. And the fleece reinforced the tape and holds any subsequently applied coating.
7) Why use a SpeedPatch to cover holes? Unlike tapes or matting, a SpeedPatch is a tough barrier that’s made from GRP laminate. This is easy to cut to size and shape around roof contours. The SpeedPatch cures when exposed to sunlight and forms a strong rigid barrier over holes. Combine this with the UV Curing primer and you’ve got a watertight seal that will go on year after year.
We are using cookies to give you the best experience on our website.
You can find out more about which cookies we are using or switch them off in settings.
You can adjust all of your cookie settings by navigating the tabs on the left hand side.