Up to 20 years of worry-free damp proofing from a single cost-effective application. Finally, you can be free from your wet, mould-ridden walls with the professional grade masonry cream that keeps your property dry, healthy and clean.
AT Waterproof and Stain Repellent Sealer uses nano-technology to penetrate up to 17mm into your brickwork or other surfaces, sealing bricks and stone and making them watertight. This means rain bounces off your surfaces or forms beading droplets on top. With your building protected with AT Waterproof and Stain Repellent Sealer, liquid cannot soak in, so penetrating damp and frost damage have no chance of getting in to your property. You stay safe and dry inside, and don’t have to worry about damp or mould.
What You Need to Know:
Size: 5L Tub
Spreading rate: 4-5m2/l
Application: Brush or roller on.
Suitable Substrates: Brick, Stone, Concrete and other mineral surfaces
Cleaning Up: You need a strong cleaning product like Xylene for cleaning tools, etc afterwards.
How Do I apply It?
Your surface should be clean, dry and sustainable. New surfaces can be treated right away.
Older surfaces or surfaces which are very dirty, or have moss or algae growth must be treated with a Biocide prior to the application ofAT Waterproof and Stain Repellent Sealer. After about 24 hours, when the surface is visibly dry and feels dry, go ahead and apply the AT Waterproof and Stain Repellent Sealer.
Designed for easy brick sealing
Use a brush or roller to apply AT Waterproof and Stain Repellent Sealer generously to your clean and dry surface. Usually one application is enough and if you want to make a second application it must be done within 1 hour of the first application, or else the first layer ofAT Waterproof and Stain Repellent Sealer will block the next treatment– that’s how effective it is.
Recommendation: Always make a test coat to ensure the compatibility of product and surface.
Why Choose AT Waterproof and Stain Repellent Sealer?
- Cost effective protection with an incredible life span of up to 20 years, avoiding costly re-application
- No expensive contractors with a quick and easy DIY application – your walls are saved within hours
- Cut energy costs by keeping walls dry and healthy, helping heat to stay where you want it
- Breathable walls – healthier building. Unlike masonry sealants, ISO Dry keeps walls breathable and allows moisture to escape from the inside
- Enviously attractive appearance for your property. Mould and moss will struggle to grow on treated surfaces.
- Highly reliable nano-technology means that you’re using the latest advances to get longer lasting weatherproofing
Now, an easy way to seal brickwork and waterproof your property
With dry walls, you won’t get any frost damage. Plus your insulation could be more effective. Growths are also reduced, meaning your property won’t become discoloured. While your neighbour’s building degrades and original features are lost, yours can be preserved. AT Waterproof and Stain Repellent Sealer gives you a building to be proud of.
Get the surface clean and dry. Use a brush or roller to apply AT Waterproof and Stain Repellent Sealere generously to your clean and dry surface. Usually one application is enough and if you want to make a second application it must be done within 1 hour of the first application, or else the first layer of AT Waterproof and Stain Repellent Sealer will block the next treatment
AT Waterproof and Stain Repellent Sealer is an aqueous, solvent based, hydrophobic impregnation. It’s based on a extra high content of the active ingredients nano, silane and siloxane.
Colours: Milky white on application, colourless when dry
Spreading rate: appr. 4-5 m²/l
Dilution: Ready for use
Application conditions: The temperature must be 5°C – 25°C and max. 80% RH. Do NOT apply to a very hot surface
Application method: Brush or roller
Cleaning: Water and soap. Use a Biocide to kill living spores such as algae and moss
Storage: Cool, but free of frost in closed containers and out the reach of children